Tips You Must Follow For Maintaining a Datsun Go

In today’s world, you may have to drain your wallet when you are purchasing a luxury car. So, if you’re planning to drive the car for a long distance trip, then you should always maintain the Datsun Go on a regular basis. In case you neglect doing so, then you would have to pay a hefty amount for costs year after year.

Change Brakes
There’s no other option than requesting the technician to change the car brake after every six months. You should consider this tip seriously because you would always have to control the vehicle once you’re driving it at high speed. If it’s affordable, then make sure that the brakes are lubricated so that the occupants are not distracted with the squeaky noise. This step would help the component to last longer and augment towards a better performance.

Change headlights
Though it might be a pretty expensive affair, it’s essential to change headlights at the Datsun Go dealer. Once the part becomes old, it actually uses power more than the usual level. So, when you move on with a routine checkup, you should insist the technician to change the lights. In case the bulb needs to be replaced immediately, then you should take action as early as possible. A delay can bring in discomfort when you’re driving the car along a murky road.

Maintain the engine
If you’re someone who likes using the vehicle quite frequently, then you must ask the technician to check the engine soon after the car has crossed 3000 miles. To boost performance, you must also change the filter along with the engine oil. Whenever it’s required, you shouldn’t hesitate to check the brake fluid as well as the automatic transmission fluid level. Moving ahead, you should check for cracks along the casing so that you don’t have to deal with leakages. Never wait till engine belts wear down. Instead, change the engine belt or else you would be stuck with a problematic situation. Apart from everything else, you should also replace old spark plugs which affect the fuel efficiency considerably.

Maintain the battery
The battery that’s installed inside the car is the most important component. This is because the vehicle would function properly only when the electronic system is able to send commands. In case of battery failures, you are bound to encounter problems. So, to avoid the hustle for a replacement, you should purchase a battery charger after going through Datsun Go specifications. Once you start using the charger, the battery would be charged without any damages. Furthermore, the lifespan of the battery would be enhanced to a considerable extent.

Finally, see to it that the technician checks ball joints, struts and rods at least twice every year. Remember to change the washer blades because they tend to wear out due to different climatic conditions. You should never forget to check the air conditioning system at least once in a year. Contact a Datsun Go showroom in case you are thinking about purchase the luxury car.

Mehul is a content writer who loves writing blogs related to Datsun Go. Besides, he has a forte of drafting articles on trends prevalent in the automobile industry.

Best Remapping Tools to Improve Car Performance

Before we discuss about the upgrading tools for car remapping, don’t you feel that we should know about the car remapping, its benefits and process to apply on your vehicle?

What is car remapping?

Car remapping can be defined as the process of adjusting settings of engine control unit (ECU) chip that is installed in your car. The reason due to which car owners opt for the remapping is due to standardization of car’s original settings determined by the car manufacturers. Because driving standards in all the countries are not same and therefore keeping those standards in concern the parameters of ECU are determined for each countries.

You would have also noticed that whenever any car is launched in the international market different types of engine configurations are determined for different regions. This is mainly because the driving standards applicable in one country and not feasible in another country. That means we can say that in real terms no ECU is adjusted to perform according to fullest of its efficiency.

Going through the problem, the car which you used to drive, might be generating high power and fuel efficient performance in comparison of the original car manufactured by company. As an impact of this to get rid of this problem the best way is to remap the engine of car according to actual standards of the engine or according to your requirement.

Apart from above mentioned reason of car remapping there is one more reason when you might have to get engine remapping of your car. For instance if you replaced or upgraded your existing exhaust system of your car, then also it becomes imperative for you to remap the engine control unit of your car in accordance to settings of upgraded exhaust system.

Major benefits of car remapping:

  • Increase in power and torque generation efficiency;
  • Increase in fuel efficiency;
  • Improved acceleration and braking system, offering you smooth handling of the car;
  • Appropriate control over the car as the result of upgrading braking system;
  • Comfortable and relaxed travel due to improved suspension system;
  • Increase in aestheticism of your car through new set of alloy wheels.

Upgrading tools for car remapping: Well, after understanding the concept of car remapping and the benefits associated with it, let us now focus on the upgrading tools used for car remapping.

    1. Wideband AFR Meter: Air fuel ratio meter (AFR) is one of the complicated and highly required upgrading tools for car remapping. The main objective of this tool is to determine that the fuel is reaching to the engine in smooth way along with the proper flow of air. It would be interested to know in the early days these the cost of meter was quite costly, but in current scenario with increasing trend of car remapping high quality of air fuel ratio meters are being offered various renowned manufacturers.
    1. Dynamometers: Where use of air fuel ratio is little difficult, tuning the dynamometer is undoubtedly the simplest methods of car remapping. It is not only safe for the engine but also for the person tuning the car. The main objective of tuning the dynamometer is to determine the standard parameters of power generation efficiency of the car and abort the functionality of the car if it detects that the car is being driven beyond those parameters. Along with this the dynamometer is also protective and not only protects from any type of physical damage to the person but also protects him from any type of legal action determined for upgrading the performance of the engine through remapping.
  1. Timing light: While talking about the cost effective upgrading tools for car remapping it would be important to mention the name of timing light. If you are remapping your car for the first time then it is one of the highly preferred tools for remapping. The tool helps in determining the timing of the ignition system and helps us in getting assured that number of ignition table and engine are same. To generate the light the tool makes use of an inductive clamp mounted across the ignition lead and as soon as spark emerges in an engine it generates the flash to let us know the number received by the engine and ignition system.

Apart from above mentioned car remapping upgrading tools there is plethora of tools like audio knock detection, street and track detection tool, exhaust gas exchange meter to upgrade the performance of car exhaust system and many more that are helpful for tune-up performance of car yourself.

Understanding The Whole Concept of Car Chip Tuning for Its Enhanced Performance

Now-a-days, trends of car chip tuning has gained a huge popularity across the world and most of car enthusiasts can be seen visiting the garage for getting tuned their car to enhance power and performance. An interesting fact about the chip tuning is that this trend is not only found among the car enthusiasts having a three to four year old car but also among the car owners who had recently bought a new vehicle which is not even a year old. Well, now the question arises, that despite of having a new car why do these car owners tune the chip like the old car owners?

An answer to this question is just the same as for the owners of old cars, to enhance the hidden performance which have been restricted due to existing driving conditions prevailing in their country. That means, it can be said that car chip tuning is the process that is helpful in booming performance of the car. But, now the question is how many of actually understand the process of chip tuning? Because, following the blind race getting the chip tuned has although become a fashion among the car owner, but until unless you do not know the process, you will not be able to notice the changes.

Process of Chip Tuning: In simple, chip tuning is the method which reprograms the electronic control unit (ECU) of car and makes it work according to the newly determined parameters. The ECU is placed in the injection system of the car and monitors the ratio of fuel and air that generates inside the engine. Reprogramming the chip facilitates you to let understand the type of ratio you wish to develop inside the engine as the impact of air and fuel combination.

The cost of chip tuning mainly depends upon the tuning method adopted by your mechanic. Anyhow, as the process is a complex activity that revolves around the computer and electrical system of your car it should be conducted with full discretion as the whole process not only impacts the performance of car engine but also the performance of the various parts associated with it.

Components that are controlled by the chip: With changing in techniques of car manufacturing the components associated with the ECU are also changing from time to time, and therefore depending upon the manufacturing year of car the components linked with it may vary. Some of the components affecting its performance are fuel injection system, accelerating system, timing and ignition system, vehicle stabilization system, valve support system and automatic transmission system. All these components are sensitive parts of your car and their perfect combination with the chip results in boosting the performance of the car through valve injection systems.

Some more facts associated with the ECU system

The ECU system is normally located closed to control panels located on the dashboard. Its performance is mainly controlled through the port known as diagnostic port. It is seen that lots of car owners having the vast knowledge of computer try to tune the chip at their end and get them caught in the web of calculations that it becomes difficult for them to come out from it. On the contrary they even disturb the existing settings of the engine too which damages the functionality of the engine. To avoid such problems it is always suggested to visit a professional having vast knowledge of chip tuning.

Here it would be important to mention that today although there are lots of manufacturers that offer do it yourself chip tuning devices, but despite of this the best way to avoid any problem is to seek the assistance from an expert.

In simple words it can be said that car chip tuning can be helpful in exhausting the car performance in term of power and fuel economy. Also, there are many tuning software available in market to get your car tuned with just installing that software yourself or with help of remapping experts.

Get Yourself Acquainted With the Knowledge of Car Tuning by Undergoing the Necessary Training

Which is the best profession to enjoy the successful life is one of an important question from which thousands of graduates have to combat every year after completion of their studies. Because, today when every country across the world is struggling with the problem of unemployment. Days have gone back when the graduates had an option of choosing the best profession for them. The severity about the problem of unemployment can be realized from the fact that even professional degree holders are not able to find the suitable job for them. On the other side it is the dream of every graduate that the profession in which he steps not only offers him substantial money to meet his financial demands but also explores his name as an expert in the profession that he opts for his livelihood.

Going through this practice, in recent years different types of off-beat courses have been initiated by various academic and technical institutions that are offering technical training courses to the aspirants willing to explore their career in some creative fields. In the automobile sector, car tuning training is one such course which can be a fruitful course for the graduates willing to establish their name in technical field. You will agree that it is desire of every car owner that he enjoys the same power and performance from his car that he had been enjoying at the time of its purchase. But, as the years passes there is decline in the performance of car which adversely impacts the budget of the car owners.

To get rid of this problem either they have to sale their existing car or have to find optional methods of transportation, whereas the fact is that they can enjoy the improved performance of their car by getting it simply tuned by an expert mechanic. Taking the advantage of this today lots of institutions and car modifiers have started different type of car tuning training courses to the students willing to strengthen their name in some creative field. The worth mentioning feature of such courses is that they not only offer appropriate income to the person but as the time passes and he gains experience in the field his name explores not only in the industry but also among the reason. Keeping all these factors in concern, now day’s lot of students are getting themselves enrolled in this course.

Types of courses offered to the aspirants pursuing training in car tuning:

  1. 3 Day combined diesel and gasoline course: Students under this course are given the knowledge about remapping engine control unit of diesel and gasoline vehicles. The area of course includes ECU remapping and understanding the parameters that are helpful in delivering the desired results. The students are also taught the methods of using dyno and different types of other relevant equipments.
  2. 5 Day advanced tuning course (diesel and gasoline): This can be regarded as the extended version if 3 day combined course where in along with the methods taught in this course the students are given on the hands practical knowledge to get acquainted with the methods of engine remapping and also the methods of solving different types of tuning issues which they might face while working as an independent tuner.

Besides these two short courses there are various types of courses offered by technical institutes helping them in understanding the techniques and methods that are helpful in tuning the engine and achieve desired results. Once the students successfully complete the undertaken course he is given the certificate of the accreditation allowing him to work as an independent engine tuner by setting up his personal tuning centre or joining some reputed tuning centre.Relevance of car tuning training: Tuning the car is helpful in regaining the lost power of the car or in other words there is always some hidden power inside the each car which is not disclosed by the manufacturer during the time of its launch and is determined according to the driving standards of the particular region. During the tuning process the tuner rewrites the existing settings strictly according to the new parameters depending upon the requirements of the car owner resulting an increase of 20% to 30% in its power generation efficiency.

Interestingly, today there are lots of do it yourself performance tuning tools available in the market which can be carried out by the person with little mechanical knowledge but as the whole project is quite complex and little mistake might affect the functioning of the whole car mechanism it is better to get it tuned by an expert tuner. Also, you can also learn the car engine tuning from any certified academy to tune your car at home.

Importance of Applying Protective Coatings Over Paint

Now that you have driven your car off the lot, you want to keep it in as neat condition as when you first received it from the Showroom. The automobile industry has made great strides in technology and the innovation of Protective Coatings have greatly improved the longevity and durability of Vehicle Paint.

Various forms of protective coatings can be applied to protect your vehicle from the elements such as Sealants that seal the paint from the harsh environment and provide long lasting protection, Waxes that provide a deep wet-look shine and offer unique protection and gloss enhancing properties, Ceramic Coatings that chemically bond to paint and provide superior durability, making maintenance much easier.

Let us closely examine the reasons why protective coatings are of utmost importance.

    • Daily, your vehicle endures all forms of surface ‘attacks,’ from scratches to contaminants that are an inescapable part of owning a vehicle. The Gtechniq product range provide a tough, protective surface to the car’s paintwork. Developed through Science, products chemically bond to the vehicle paintwork, thereby adding a protective layer that can combat a great deal of damage while at the same time retaining deep gloss and shine levels on the paint.
    • Crystal Serum – Gtechniq’s most ultimate form of paint protection, can only be applied by a Gtechniq Accredited Detailing Facility and is not available to purchase over the counter. Unlike waxes and sealants which will, at most, protect paintwork for a period of six months, the coating is warranted to last on your paintwork for seven years and is capable of protecting paint against acidic components and bird droppings.
    • Upon application of the coatings, the vehicle surface is not only protected but is also a breeze to maintain. Due to the hydrophobic top layer, water and dust easily repel meaning that the vehicle can be washed and dried within minutes.
  • Coatings would also be applied to Wheels, Glass, Trims, Interior Leather, Fabrics, Dash etc. with the main goal to achieve a top coat hydrophobic finish and make maintenance very easy.

The car enthusiast who look to have both, a product that not only protects the car but at the same time also improves the appearance should always opt for the application of a Ceramic Coating. Due to their exceptional protection and longstanding value, Ceramic Coatings are an ideal choice for car owners who desire to keep their cars in a state-of-the-art condition for a long span of time.

Our motto is simple: Cleaning Up The City, One Car At A Time. We are here to serve you and ensure you are able to experience the joys of a clean car. Always.