How the Combustion Engine Works (and Why It Matters)

How the combustion engine works: by detonating hundreds of small explosions every second.

A piston glides along a cylinder, pushing and pulling. The piston pulls down air and gas in the intake stroke and fills the cylinder with the fuel for the fire. The cylinder is primed and the air-gas mixture is ready for compression. Compression creates massive potential energy.

The piston glides back up the cylinder, pushing the air-gas mixture hard and fast into a tiny space—compressing it down to 1/10 (or greater) of its original size (a compression ratio of 10:1). The gases are compressed during the compression stroke, smashing the molecules closer together and increasing the potential energy. Then comes the crescendo.

Spark. Ignite. Explosion. When the gases have been compressed and the piston is at top dead center (TDC), a spark flashes and sets the highly energized compressed gases on fire. Boom! The power stroke—the tiny explosion that propels all combustion engines.

The explosion pushes the piston back down and the crankshaft spins in unison. The energy moves the crankshaft and creates the power under the pedal. Finally, the piston glides back up the cylinder to eject the exhaust—the exhaust stroke—and clears the way for the process to start over. And over. Hundreds of times per second.

Your car’s engine sounds pretty smooth, but slow it down and it sounds like artillery fire—individual booms. An 8 cylinder car idling at 750 RPMs “fires” 50 times per second. That’s 50 power strokes each second while idling!

The basic process of the four-stroke engine is the same as it was in 1876 when Nikolaus Otto invented it. The only differences between an engine that powers the 2017 CTS-V with 640 horsepower (HP) and the 3 HP engine created in 1876: efficiency and capacity. It boils down to compressing air and gas into a tiny space, lighting it on fire and transferring that energy into mechanical motion. That’s all it takes to move the family minivan or James Bond’s Aston Martin.

The Four Basic Strokes: A Closer Look

The entire process only takes four strokes of the piston.

  • Intake Stroke
  • Compression Stroke
  • Power Stroke (Combustion Stroke)
  • Exhaust Stroke

Intake StrokeAs the piston moves down on its first stroke, the intake valve opens and allows the combustion chamber to fill with air and fuel. This creates a space ready to explode even without compression. But add compression and you create a lot of potential energy. It’s possible to add more fuel and more air during the intake stroke to create a more powerful mixture to increase horsepower but be sure to check your tuning if you do add performance parts.

Compression Stroke

When the intake stroke ends at the bottom of the cylinder, the compression stroke begins. The piston moves up and forces the air and gas into a tiny space. A 10:1 compression ratio will compress the air-gas mixture down to 1/10 the size of the compression chamber. The higher the compression ratio the more potential energy which means more power for your pedal. Compress for power. Note that higher compression ratios require higher octane fuels.

Power Stroke (Combustion Stroke)

The power stroke starts when the compression stroke hits top dead center (TDC) (or before top dead center, BTDC) and a perfectly timed spark ignites the gases. This moment is what the engine is all about. Getting the right gases (air-fuel ratio) ignited at the right time with as much energy as possible. The size of the chamber, the compression ratio, the spark, the timing—everything is to maximize the energy of the explosion and then transfer it to mechanical motion. The power stroke thrusts the piston downward propelled by the explosion leading to the fourth stroke.

Exhaust Stroke

On the piston’s second upward stroke, the exhaust valve opens and the piston pushes the burnt gases up and out of the exhaust valves. When your exhaust system is maximized, the pressure the piston encounters on its way up is minimal and the valve moves with less restriction which can give you power gains. Also, with a high performing exhaust system, the exhaust stroke is more likely to push all the burnt gases out of the chamber clearing the way for a clean intake stroke and a stronger power stroke. The cycle is complete and the piston and chamber are ready to begin again.

So What?

If you know how your engine produces power, harnesses that power, works more efficiently at keeping that power, then you’ll know how to make your engine perform its best. You can make cost-effective decisions on which modifications will give you the most horsepower return. To help with engine performance, you might consider an engine tune, a cold air intake, a performance exhaust, a performance intake manifold or even a supercharger.

Now that you know more about the four-stroke process, you will be able to determine how each modification affects each stroke. One mod may affect more than one stroke and give you more bang for your buck.

How to Pick the Right Decals for Your Jeep

Your jeep has to be of significant meaning to you. Surely, like any other jeep owner, you want your Jeep to standout from the crowd. But how do you do that? Do you go for a total makeover, with the finest paint job ever? Or do you simply accessorize it to turn it into the ultimate utility vehicle?

A very simple way of adding your own unique identity to your jeep is by investing in decals. Jeep decals have garnered immense popularity over the last few years, and nowadays, you can buy a wide variety of decals to spice up your jeep and give it a fresh look, different from any other jeep on the planet.

But how does one go about picking the decals? Read on to know all about it!

Think of What You Believe

One might be forgiven for saying that belief is in short supply these days owing to things happening around the world in the name of God and religion. However, the fact of the matter is, all of us, individually, believe in certain things. The beliefs might be delusional in nature, or they might simply be the source of inner strength.

No matter what it is, you are entitled to show it to the rest of the world. And what better way to show it than having it as a decal on your jeep? People would get to know something about you simply by taking a good look at your jeep, and you would feel more at home in your jeep, as it would become a reflection of who you are.

Think of Who You Love

Love, like belief, is another great source of strength. Again, many might say that love has more potential for heartbreaks than it does for giving one strength, but the fact is, love does create a lot of hope and optimism in one’s life.

You can turn your jeep into something truly inspiring for yourself by getting customized decals that are dedicated to the special ones in your life. It would also make them happy to know that you care for them so deeply to have their names etched on your jeep.

Think of What You Like/Love

You might be a hardcore Game of Thrones fan, or you might have been inspired deeply by the Fast and the Furious series of movies, and you want to show the world how much these things mean to you every time you rev up your jeep and leave your house. But how do you do it?

Simple! Get a custom jeep decal that states a memorable quote from your favorite movie or TV series, or maybe one that displays your favorite fictional character in all his/her glory.

Here’s hoping you get the best decals for your jeep to make it even more awesome than when you first bought it!

Visit SkullKrushers.com and buy off-road parts like decals of jeep to customize your jeep in your own style.

Everything You Need to Know About a Jeep JK

If you are enthusiastic about Jeeps love reading up about them, you might have often wondered what ‘JK’ stands for. Simply put, JK is a code that internationally famous brand Jeep uses to identify some of its vehicles.

Why the Code ‘JK’?

The code ‘JK’ has not been just assigned by Jeep without any kind of thought. Jeep has been creating the best off-roading vehicles for a long time now, and their vast range of vehicles are not designed all the same. To help them, and more importantly their customer to identify their vehicles better in case they have a requirement for certain parts of the vehicle, the code ‘JK’ was assigned to all the vehicles that were manufactured between 2007-2017.

The code is also backed up by the vehicle design specifications that Jeep have followed during the manufacture of their JK Wranglers. Most JK vehicles manufactured by Jeep look quite similar to each other in their original form. Of course, there might be differences between a regular JK Wrangler and a heavily customized one, but in essence and in shape, all JK Jeeps look alike.

Advantages of the ‘JK’ Coding System

  • Easier to Find Parts: Many other vehicle manufacturers often go with complicated coding systems that make it difficult to search for their parts in the market. It doesn’t matter if you go to an established store in your neighborhood, or search online for the parts you need; what good is any of it if you cannot identify the parts that you really need? Four-wheeler details are quite intricate, and you can’t really take a chance on parts that would not fit your Jeep, can you?
  • Time Saver at Stores: When you go to a store that sells vehicle parts, you might often have to provide the storekeepers a ton of details before they exactly understand what you precisely need. However, with the JK coding system used by Jeep, it isn’t any problem if you happen to own a Jeep JK model. Simply say ‘JK’, and the storekeeper can start helping you without wasting any more time.
  • Helps to Distinguish from Other Product Ranges: The ‘JK’ coding system extends only, and only to the vehicles manufactured by Jeep between 2007 and 2017. The newest Wrangler models, slated to be released sometime in 2018, would be assigned the code ‘JL’. So, this kind of coding system makes it easy to distinguish between the JK product range and previous and later ranges of vehicles.

No Space for ConfusionOn first glance, you might not find the code ‘JK’ on the surface of the jeep. In fact, there is no mention of the code on the surface. All you probably might see is ‘Polar Edition’, ‘Rubicon’, and ‘Wrangler’. While this might lead to some confusion, it really is quite simple. No matter what edition of a jeep you own, Rubicon or Wrangler, if it was made in the 2007-2017 period, it is a JK!

Shop jeep accessory like inner fenders, decals, Custom Grill Logos, Led Light Bars & Headlights, Jeep Grab Handles, Custom Paint, Custom Grills and Apparel. Visit SkullKrushers.com and buy off-road parts of jeep to customize your jeep in your own style.

Steps to Buff a Car

The process of buffing a car removes a layer of paint off a vehicle, which exposes another layer. As a result, the process reinstates the original luster of the car improving the overall appearance of the vehicle. Given below are some steps to help you buff your car.

Wash the Car

First off, you should wash the car properly and then park it in shadow. Just make certain that the vehicle surface is cool. Actually, this is to protect the surface of the car from soap stains.

Put the soap in a bucket: Now, you should put the soap in a bucket. Keep on adding water until you can see that the water is full of foam. Also, make sure that you use soaps made for washing cars.

Use a sponge: You should get a sponge and put it into the water. After a while, take the sponge out of water, squeeze it and then start cleaning the car with it. Make sure that you move the sponge properly in a circular motion.

Choose a Buffer

For fine results, it’s better to work with a high-speed buffer as they are better at eliminating blemishes and scratches thoroughly. However, make sure you practice using this type of buffer.

Orbital buffer: for better results, we suggest that you try out a random orbital buffer. The great thing about these buffers is that they are not hard to use. Moreover, random orbital buffers make use of less compound relatively. Therefore, they are cost-effective.

Manual buffing: if you can’t bear high costs, use manual buffing. However, keep in mind that manual buffing requires a lot of effort, and the results won’t be impressive. On the other hand, manual buffing doesn’t require lots of equipment.

Compound or polishing product: you can also buy a compound of polishing product for best results. If the finish has deep scratches, you should go for this option. On the other hand, polisher is used when the body paint is good but needs better shine. Actually, this decision will vary based on the model, age and condition of the car. With the buffer, you can use either of the products. You can ask your friends, or good car aficionados for product recommendations.

Buffing

First of all, you should dry your vehicle with a soft towel. In order to make sure that the vehicle is dry, you should work on the whole unit.

Next, you should apply lots of compound or polisher to the car body. Ideally, you should start with the hood.

Put the buffer on your quality polishing product and then move it around for proper application. Moreover, you should use circular motions for buffing each area of the vehicle.

Moreover, if you are going to use a good powered buffer, you should switch the product on and then move your quality buffer in a circular motion.

You should keep on buffing your car on the surface of the car until you can see sheen on it. That is it.

Improve The Performance Of Your Car With Cost Effective Performance Upgrades

Investment in the car is one of the expensive investments made by a person during his lifetime and therefore he doesn’t leave any stone unturned when it comes to the maintenance of the car. Do you that with proper maintenance you can only enjoy the smooth performance of your car for a specified period of time. Because with regular wear and tear there is decline in the performance of your car and it is not capable of delivering the same performance as it had been given at the time when you purchased it for the first time.

This decline in the performance of the car can be witnessed in the form of low power generation efficiency, decline in fuel efficiency, decline in flow of cooling from air conditioners, coming of irritating sound from the exhaust system and much more. Going through all these problems after long years of driving the same car a day comes when the person has to unwillingly sale his beloved car as it becomes difficult for him to invest additional money over its maintenance. But, interestingly, there are different types of after sales performance car upgrades which could help car owners enjoy enhanced performance of their car for many more years to come. These aftermarket upgrades not only enhance the performance of the car, but also make it look more attractive.

Below are some of the easy to install performance car upgrades to boost the performance and aesthetics of your car.

1. Upgrading the turbo engine: Installing the powerful turbo engine or configuring the additional induction to the naturally aspirated engine will help in boosting the power to a certain extent and is one of the highly preferred methods of enjoy high power from your car.

2. Remapping and chip tuning: The cars manufactured in today’s period and controlled by the software and setting of each component installed in the mechanism of the car are determined with the help of a computer. The setting of all these components is controlled by the engine control unit (ECU) which is installed in on-board diagnostic port of the car. Remapping the settings of the engine control unit and determining new parameters of engine control unit can help in not only improvising the power generation efficiency of your car up-to 40% but also helps in enhancing the fuel efficiency percentage up-to 10%.

3. Upgrading the intake and exhaust system: The exhaust system installed at the rear of your car is helpful in throwing out the hazardous gases emerging as the mixture of fuel and air inside the engine. Similarly, the air intake system is helpful in allowing a smooth flow of air into the engine. Upgrading both these components at regular intervals results in smooth flow of air and gases throughout the engine, but also helps in improving the power generation efficiency of the car to a huge extent. While upgrading the exhaust system, it would be better to upgrade the catalysts which are attached with the exhaust system.

4. Upgrading the brakes: Despite of the fact that every car owner advocates the necessity of appropriate braking system in their car. But not any of them is aware about the fact that large brake disk are helpful in eliminating the heat generated with the brakes rapidly, but also help in maintaining control and stopping the car more efficiently. Along with this the large brake disks last for a long time.

5. High defined headlights: If you are driving your car with halogen bulbs, then your safety is always at an edge of getting smashed by another vehicle coming from another direction during the night. Installing the high intensity discharge lamps is the best way to get rid of this problem. These bulbs are enriched with additional electric amplifier followed by extra bulb charged with specific gas that helps in developing extra light. The high intensity discharge bulbs are easy to install and can be done by yourself at your end with little precautions.

With these easy and cost effective methods you can easily upgrade the performance of your car according to your expectations and enjoy its flawless drive for long years to come.

A New Age: Modern Wheel and Tyre Concepts

As we move into the future there are more ideas and concepts reaching the drawing board in order to improve the way we live. We are seeing interesting car designs and, with it, remarkable modern wheel and tyre concepts.

  • Modern Tyre Concepts

Have you noticed that the modern versions of tyres have more geometric patterns with a stronger and bolder appearance? We are lucky that our generation is moving to a more practical state of living and considering every aspect of comfort and design before manufacturing.We are also seeing more unusual colours coming into the picture. Why? Designers find different materials for reinforcement components. Then they use paint or resin which gives the tyre colour and a more attention-grabbing design structure.

Designers and engineers are also starting to find ways to get more air into the tyres. This might sound crazy considering how racers try to get their tyres as hot as possible. Certain tyres have not been designed to be in contact with such heat. So by adding such new features we might be saving our tyres from being replaced so often.

We are also seeing wheels are becoming wider, whether you have a high performance car or not. The first cars made had skinny little wheels that would wobble if the driver went a little too quickly along the brick road. These wider wheels give the car more stability on the road especially when taking corners.

  • Modern Wheel Concepts

Modern wheels resemble Ninja stars and mini blades. The wheels are less bulky using less alloy material. There are more spaces between the decorative spokes that add to the lightness of it.We are also starting to see more colours being painted onto the surface. Some colours are matte which is different from the standard glossy paint. Other colours are metallic which create the appearance of a shimmer of sunlight bouncing of the wheels.

Angles are popular in modern wheel designs. Certain angles can actually influence the driving ability of the car. If the angle is facing away from the front of the car, then the wheel was designed to improve your aerodynamics.

We can also see that where the spoke starts at the centre of the wheel the metal protrudes slightly making it more difficult to remove the branded disc in the middle. These are valuable on backstreet markets so thieves tend to steel them and resell them. So the metal protrusion discourages such theft.

It is a good thing that wheels and tyres designs are evolving with the times. People always want to get a fresh new look that could potentially perfect our driving.

Minty’s is amongst the leading tyre suppliers in South Africa, and is recognized for our high standard of customer service. We have built a reputation amongst our customers and ensure that they receive tyres and alloy wheels of the highest quality, amongst the largest brands nationwide.

Top 7 Vehicle Hack Items That Every Jeep Owner Must Own

Vehicle hacks are important because they can keep you out of trouble in various scenarios. Jeep owners love to go all out on their trips. If you are an avid driver and love to go on long road trips, you need to have a few hacks up your sleeves and prepare yourself for the worst-case scenario.

Here are top 7 vehicle hack items that will keep you out of trouble.

Snow Tracks

This goes without saying, if you plan to drive your Jeep in a snowy area, you need to make sure that you have the necessary gear for yourself and your Jeep ready. Snow tracks are convenient and compact chain devices that you can fit on your Jeep’s wheels to help them get enough traction on the snow.

Jeep Cooler

If you are planning on going on a long journey with friends/family, you must carry some food with you. A Jeep cooler is a compact electronic device that derives its power from your Jeep’s cigarette lighter power source. This small cooler will help you keep food items as well as drinks for prolonged periods.

Grippy Strips

Grippy strips are fantastic devices that help you organize your stuff in the Jeep’s cabin. We all have gone through the pain of losing our cellphone between the seats during a long journey. If you are one such clumsy person who desperately wants to keep the interiors of your Jeep clean, you must try these grippy strips. The strips act like a double-sided scotch tape and they stick to your dashboard. You can now use the open surface of the strip to place your phone or other essentials at a noticeable position.

Basic Tool Kit and User Manual

Most Jeep owners carry a small toolkit with them that can help them tighten some screws or bolts. However, without the proper instructions, it is possible that you actually worsen the conditions of your Jeep. It is always advisable to place your Jeep’s user manual in a clear plastic bag with the toolkit to make it easily accessible in case your Jeep breaks down.

Window Covers/Blinds

Window covers are nifty devices that you can use in case you are going to drive all day long. These covers stick to the side of your Jeep’s windows offering sunlight protection to the passengers. Now, your co-driver/passengers can easily enjoy a sun-free environment to rest for a while.

Inflatable Jeep Jack

An inflatable Jeep jack is a device that replaces the work associated with using a conventional mechanical Jeep jack. This Jeep jack derives its power from the vehicle to lift it up so that you can easily change the flat tire.

Rain Covers

If you own an open roof Jeep Wrangler, it is always a good idea to carry a set of extra rain covers to protect the essentials. These rain covers will help you protect the costly speakers and navigation system in your Jeep on a rainy day.

Follow one or more of these vehicle hacks to ensure that you go through your next long journey without facing any glitches.

Visit SkullKrushers.com and buy jeep accessories like Inner Fenders, Vinyl Decals, Multiple Grills, Jeep Grab Handles, Gas Caps Logos, 3D Logo Badges, Hoods and lots more to customize your jeep in your own style.

The Coolest Jeep Modifications for a Jeep Girl

Getting cool mods on a vehicle helps you make a fashion/personality statement even before you enter the party. Jeep is one of the most popular vehicles for modifications. Millions of people across the globe modify their Jeeps to make them look cooler or add extra functionality to it. If you are one such Jeep girl who loves her jeep, you have got to check out the following Jeep modification options.

Matte Colors

A matte body paint is one of the coolest modifications that you can get done for cheap. Usually, Jeep is available in pretty boring colors. You can change this on your Jeep and truly personalize it by coloring it with your favorite matte color. The matte colors have two great advantages. Dirt on these jeeps is pretty much invisible and blend in, in case you choose a dark matte color like blue or black. On the contrary, if you love bright colors like white or yellow, you can easily see dirt in the most common places and take steps to clean it.

Off-Road Wheels

Wheel mod is one of the most popular modifications for Jeep owners. If you love to go for an off-road adventure in your Jeep often, you must install a good set of off-road wheels. These wheels offer an awesome traction that will help your Jeep get out of pits and sticky situations. If you are opting for a matte color on your Jeep, you must ensure that your wheels too get the same matte color. This will help you give a wholesome appeal to your Jeep.

Fog Lamps

Fog lamps are slightly costlier and you need assistance from a professional electrician to install them. However, once they are on, your Jeep is bound to stand out from the crowd in the day as well as the night. If you have an overhead rail as well as a bumper on your Jeep, these lamps will fit right into their places.

Extra Cabin Space

You have a lot of room in a Jeep especially if you own a two-seater Jeep. You can utilize this space efficiently to fit in a drink cooler or a utility box in your vehicle. Jeep owners often tend to take their Jeeps on a long adventurous ride across states. If you are one such person, you must utilize your extra cabin space perfectly to fit in the necessary accessories for travel.

Vinyl Decals

If you are opting for a matte color, you can highlight your Jeep’s looks with some Vinyl Decals that look great on the matte background. The best part about choosing a Vinyl Decals is how you can reflect your personality as well as likes with the Jeep’s looks.

Great Pair of Speakers

If you love music, you cannot go wrong with a great pair of Bose or JBL speakers in your jeep. These speakers are more than enough to keep you entertained on your interstate journey in your beloved Jeep.

Set a small part of your funds aside to modify your Jeep and truly personalize it the next time you plan on buying a new Jeep.

Visit SkullKrushers.com and buy jeep accessories like Inner Fenders, Vinyl Decals, Multiple Grills, Jeep Grab Handles, Gas Caps Logos, 3D Logo Badges, Hoods and lots more to customize your jeep in your own style.

The Best Tyres for Your Jeep

Jeep is known to be the king of four wheel drive vehicles. It has the capabilities of driving over the steepest rocks as well as battling the muddy and wet grounds without difficulty. This is all possible with the right tyres.

Off road tyres have specific features that make them the ultimate climbing tools. The treading is, of course, what gives the vehicle the grip to climb up on steep surfaces. The tread is also what allows liquid to pass through in case you are driving on a wet and muddy day.

The size of the tyre is everything. The bigger the tyre the more surface area it can cover and the more stable it is. Larger tyres also make driving a 4X4 vehicle much easier and more comfortable for the driver. Larger profiles are safer too. You won’t really find off road tyres with a narrow sidewall because they need to be tough and resilient. More volume within the tyre benefits the driver whilst climbing over rocks. Remember that you won’t always be facing a blunt surface but rather more protruding hills that will stab into the tyres. The air inside the tyre helps to protect the wheel which gives the car more bounce when driving over certain obstacles. It thus decreases the likelihood of a puncture due to the amount of pressure placed on them. Besides being useful to the whole outdoor experience, the large, wide, deep tread tyres also give the Jeep an aggressive modified look that is admired by many people.

So which brand of tyres will work best for a Jeep?

BF Goodrich has a reputation of being the strongest brand when it comes to outdoor or off road driving. The rubber has been specially engineered to handle water, dry surfaces and cracking stones.

Goodyear has various types of tyres that work well in any weather conditions and many types of terrain. They also have a reputation of being the highest performing tyres in different terrains and are a definite must have in terms of choosing tyres.

Toyo is known as a performance tyre for quick and speedy cars. They infused their technology with Jeep’s technology to create an amazing combination. Not only do you have a smooth driving experience that handles like a sports car but you also have that aggressive performance that takes on the rocks with all its power and might. Longevity is also a promise when it comes to Toyo tyres.

Minty’s is amongst the leading tyre suppliers in South Africa, and is recognized for our high standard of customer service. We have built a reputation amongst our customers and ensure that they receive tyres and alloy wheels of the highest quality, amongst the largest brands nationwide.

Features You Can Expect From The New Model Of Mitsubishi Pajero

An individual can always perceive something unique as the Japanese brand, Mitsubishi is planning to launch a new model next year. As the new Pajero sports a robust ladder-frame chassis, the design would be based on the Triton pick-up truck. You would always be happy to purchase the vehicle due to a host of features.

Extraordinary Exteriors
The all-new Pajero would look much different than the current model. The new set of grille known as the ‘Dynamic Shield’ would protect the windscreen when the vehicle is driven through deep puddles. The vehicle would also boast brand new LED projector headlamps. While the car would be 90mm longer than the model, the rear overhang would be redesigned for creating more room for commuters. However, there won’t be any modifications with the wheelbase. The vehicle would look magnificent owing to the alloy wheels, the chrome license plate garnish and impeccably designed rear-view mirrors.

Amazing Interiors
The new Pajero would boast a new look for redefining style. The chrome finish near the steering wheel and the door pads would add-on to the visual appeal. Besides, the touch-screen infotainment system would be large in size and be situated in the middle of the dashboard. The sporty leather seats would be ergonomically designed to offer comfort hours on end. An individual can always adjust the angle owing to seat recline on the 2nd as well as 3rd row. As usual, the SRS airbags would offer protection to the driver and the passenger whenever the car collides. On the whole, contemporary Pajero Sports interiors would make heads turn as you drive along streets.

Performance
Once the Mitsubishi Pajero Sports car is designed, the vehicle would be powered by a 2.4 liter-MIVEC, four cylinder turbo diesel engine. An exceptional performance can be anticipated because the engine delivers power as high as 181 BHP along with a torque of 430 Nm. The eight-speed automatic transmission system would easily adapt to the driver’s preferences after monitoring the engine, gearshift timing and foot-braking data. The driver can also feel the comfort with the Super Select four-wheel drive. For the first time, the new Pajero would feature an electronic handbrake apart from the central differential lock and a low-range transfer case. To maintain the consistency in the performance, the vehicle would boast a 16-valve layout with the precisely balanced roller-rocker arms for better combustion.

As compared to the present model, the new vehicle would still be using a common rail direct injection system. The electronically controlled injection would enable the system to make adjustments which would eventually lead to controlled power output with little emissions. The variable geometry turbo would never fail to deliver power just as much the car needs. In order to keep the performance at an optimal level, the VGT would harness power for delivering fresh air. Moreover, the intercooler adds on to combustion and greater power as air would be pumped to the cylinders.

Hope the excitement stirs up as you approach Pajero dealers to check the vehicle. Just before you purchase the car, don’t forget to test the vehicle for comfort and luxury.

Mehul is a writer who loves drafting blogs on different models of Mitsubishi Pajero Sports car. Besides, he prefers writing on topics related to automobile trends.