4 Useful Benefits of Detailing Your Car

Detailing your car is a practical option to rejuvenate the paint work and keep the interior clean and fresh. A well presented car is easy to maintain and certain to sell better in the future. Here are a few benefits of detailing your car:

Promotes good health

Many vehicles are likely to be carrying millions of microscopic occupants. Allergens and germs are easily able to flourish in the warm and compact space of a car. The build up of food debris, dust and general dirt on the seats, upholstery and inside the cabin filter can soon lead to the growth microorganisms. A full vacuuming session will remove virtually all of these particles. Plus, the use of appropriate cleaning solutions will help to sterilize the interior surfaces. If you start to experience sneezing and sniffling after entering your car, it may be time to have a complete interior cleaned.

Car’s resale value

A car that is kept crisp and clean is that much easier to sell in the future. A car with drab-looking interior or coated in dirt and grime isn’t likely to give the desired impression to a prospective buyer. Also, the regular car care is certain to help maintain or even increase the potential resale value.

Remove marks

Detailing is the most practical option to rejuvenate the paint work by reducing or removing the signs of existing etching, scratches, swirls or fading. Also, this will help to protect the paint and give it long-term protection. Any containment left on the paint or other finishes (vinyl, chrome, leather, etc.) will slowly eat into the material and cause long-term damage.

Also, the car that is regularly detailed is easier to clean and retains its shine for longer. The repeated protective treatments are also useful for slowing the build up of dirt which is less able to stick to the slick and shiny surface.

Stunning looking finish

Whether it is a Ferrari or Fiesta, the detailed cars are given a stunning finish that is certain to stand out. Even for those that regularly give their car a wash and vacuum, the full detailing takes things to a new level for the most impressive look.

Overall, detailing your car isn’t a necessity, but is certain to help maintain the attractive look inside and outside the vehicle. While a normal car wash can benefit, this doesn’t always do enough to remove the most difficult blemishes and stains. This is only achieved with a regular detailing.

Top 10 Tips To Take Care Of Your Car

If you schedule lubrication and maintenance based on the type of liquids, grease and oil, you can take due care of your car. If you want to increase the lifespan of your vehicle, you may want to replace the common wear-and-tear components like timing belts prior to their breakage. Let’s go through some easy tips to take care of your car.

The Maintenance Makes a Difference

First of all, you need to understand that no secret exists for making a vehicle last forever. All you can do is extend the life of your vehicle with regular maintenance. What you need to do is perform fluid checks and lubricate your car based on a schedule.

Actually, the selection of the right type of oil and grease is very important. Even if you use the best oil, your vehicle won’t work well if you don’t change the oil at the right time. Moreover, cleaning the finishes of your car is also good from aesthetic aspect. Actually, things like paint, leather, plastic and fabric are in need of help in order to survive the attacks of the sun and the weather.

Tip 1

You should check the oil and change it on time. You can’t extend the life of your vehicle without changing its oil and filter. On the other hand, if you want to destroy your engine, you should stop changing its oil.

Tip 2

You should flush your cooling system and then change the coolant every year. If you want to maintain your cooling system, we suggest that you create a mixture with an equal amount of distilled water and coolant. This is to prevent deposits and corrosion from accumulating in the cooling system.

Tip 3

You should change the differential oil and transmission. Although these fluids don’t require frequent service, they must be changed based on the service frequency. What you need to do is use gear oil and transmission fuel of the right viscosity and type.

Tip 4

Although washing the exterior of the car is recommended, you should do it anyway. Aside from this, hosing off road grime and winter salt is also a great idea.

Tip 5

keep in mind that every vehicle with parts that move requires grease in order to stand the test of time. Actually, the ball joint life decreases because of poor lubrication.

Tip 6

If you want to keep the paint looking great and protected, we suggest that you apply a coat of high quality wax. You may want to use wax a minimum of twice per year.

Tip 7

Driveline parts like u-joints also need lubrication on a regular basis. Aside from this, the driveline may need to be removed in order to get access to the fitting of zerk grease.

Tip 8

You should protect the internal plastic if you park your car in the shade with a UV protector and a window deflector. This will prevent the vinyl and plastic from drying out.

Tip 9

You may want to examine and repack the wheel bearings with high quality wheel grease based on your service intervals. Compared to hub replacement or spindle, grease and wheel bearings cost less.

Tip 10

You should keep in mind that brake fluid is kind of hygroscopic, which means it can attract moisture. Moreover, moisture may cause your vehicle parts to corrode. As a result, the components may fail sooner than you think. What you need to do is replace the bleed system and the fluid on annual basis. Remember: brake fluid is not expensive. On the other hand, sensors, hoses and calipers cost a lot of money.

Have you been looking for a way maintain your car? If so, we suggest that you check out OBD2 software.

ECU Remapping: Why and How It Improves Performance of The Car

In today’s era, chip constitutes an important mechanism of your car and plays an interesting role in remapping the engine control unit (ECU) of your car. Mechanically, the main objective of ECU is to make smooth flow of air and fuel throughout your vehicle, generate high pressure and improve its performance in form of acceleration and fuel efficiency. Remapping the engine control unit completely changes the functioning of engine and facilitates you to determine its working according to your requirements.

Now the question might arise in your mind that why a person will need to remap the Engine Control Unit of his car, if he is enjoying its flawless drive without any issue. Well, an answer to this question can be to enjoy the hidden powers of his car. Being a layman, you must be unaware about the functioning of ECU, so it may be defined as heart of the engine installed in your car whose main function is to control the working different components while driving. The settings of these components are determined according to mechanism of the car so that it offers smooth performance to its driver.

This setting is basically determined according to climatic and driving conditions prevailing in different countries across the world. As most of the car lovers are normal drivers they do not pay much attention towards all these aspects while buying their favorite car, because their main requirements from their car are fuel efficiency and integration of contemporary features and safety features.

Whereas, on the other side there are car enthusiasts for whom a car means a device which they are entitled to use according to their wishes by using its all potentials. But, as those potentials are not configured in the car which they drive in their continent they are not able to enjoy its drive according to their wish. With remapping the ECU, today be redefining the settings of different components with help of a small chip they can get rid of this problem.

During the remapping the new chip or software is configured in the serial port of the car for rewriting the setting of engine with new code that are mentioned in the software. The process of remapping is almost the same for both petrol and diesel variants.

Benefits of ECU Remapping:

  1. Increase in Power and Performance: The remapping of ECU results an improvement power and fuel efficiency of your car. It would be interested to know that remapping of diesel variant offers much better results as compared to petrol variant. The rewritten ECU offers improved fuel efficiency, improved ignition timings and optimizes the overall performance of your vehicle.
  2. Enhances the Aesthetics of Your Car: The ECU remapping is not restricted only in determining the settings of engine but also refers to determining the settings of different components like exhaust system, braking system etc. Because to enjoy improved performance of engine it is mandatory that these components should also be compatible according to engine’s setting to offer better response.

Things to consider while remapping the ECU:

  1. Always prefer to buy the chip from the maker that offers substantial warranty on the software.
  2. Before installing the chip in ECU make sure that it is compatible to make of your car and its engine.
  3. It would be better to remap the car that is empowered with turbocharged engine in both petrol and diesel variants.
  4. Although remapping do not affects the insurance of your vehicle, but still it would be better to inform your insurance company about it, so that it might follow the instructions according to standards determined in your country.
  5. Before remapping, make sure that the other components of your car are also in good condition to response simultaneously to remapped settings.

Simply, it can be said that trend of remapping of Engine Control Unit is flourishing at jet dynamic speed across the world among the owners to all types of cars and facilitating them to enjoy the full potentials of their car in less investment.

How Car Tuning Can Help You Boost The Performance Of Your Car

Being a novice car driver you might think car tuning might refer to tuning the sound of your car while you accelerate its speed. This however is true to a certain extent, because improvising the sound of the car while you accelerate its speed is also a part of car tuning, and mainly refers to enhancing the condition of your car’s exhaust system. The main objective of the exhaust system is to exhaust the poisonous gases generated by the engine and improve the performance of the engine, the sound that generates during this process gets deteriorated if the exhaust system of car is damaged. Therefore, when you get the system for exhausting gases repaired or replaced it starts generating the standard sound.

But when someone talks about re-tuning the car tuning of your car he mainly refers to enhancing the performance of your by modifying its various aspects depending upon the requirements of the car owner. As a general practice car tuning is mainly performed on cars which are about eight to nine years older, but interestingly today, even car owners are of new cars are also getting their branded car re-tuned to enjoy its performance.

This might surprise to you, but the cars that are manufactured across the world by different manufacturers are strictly developed according to driving standards determined in each country. As an impact car owners in some countries are not able to enjoy the full potential of their car to its full extent. Therefore, to get rid of this problem they get their car re-tuned according to its determined settings.

Interestingly car tuning is not restricted to only one or two areas, but covers different aspects of the car, including engine, wheels, spoilers, exhaust system, braking, suspension system and even an air conditioner vent. In simple words it can be said there are various components of your car which, if reworked can help in enhancing the performance of the car.

Let us now focus on some of the aspects which could help in improvising the performance of car by tuning it.

Engine: The performance of the engine can be boosted with help of chip that is basically installed in the engine control unit (ECU) of the car. The ECU is mainly placed at the on-board port of the car and by changing its settings or rewriting its program with help of chip the performance of the engine can be improved by enhancing its power and torque generation efficiencies.

Braking system: Once the performance of the engine is enhanced, undoubtedly it will also result in an enhancement in its acceleration power. Interestingly, increase in acceleration means a hike in pickup efficiency of the car, which adversely affects its braking efficiency also. If the braking system of a car is not compatible to the power generation efficiency of an engine, it means an increase in the chances of accidents. Therefore, to make the braking system compatible to the engine it is imperative for you to upgrade the braking system according to the power generation efficiency of your vehicle.

Air filter: Replacing the air filter at regular intervals is helpful in increasing the fuel efficiency of your vehicle to a huge extent and also an easiest method of car tuning process. You can also make use of induction kit for improvising the flow of air in fuel injection system despite of using the standard air box. The induction kit has a pointed filer which is installed directly above the air flow gauge and results in smooth flow of air through the engine, thus enhancing its overall performance.

Exhaust system: It is also one important factor to consider while you plan to tune your car. Installation of powerful exhaust system equipped with strong pipes helps in the exhaust of gases more conveniently and smoothly.

Moving ahead, you can also work on improvising the performance of a car’s suspension system. To make your car compatible to enhanced engine tuning it would be imperative for you to replace the existing suspension system with a new one and also work on replacing the shock absorbers and wheels so that it is easier for drivers to control his vehicle according to newly determined standards.

It would be interested to know that today there are countless tune it yourself methods which are helpful in enhancing the performance of your car in minimum investment.

Prepare Your Jeep’s Interiors for an Unforgettable Off-Road Experience

Off-roading is getting more and more popular by the day. However, most off-road drivers think that it is only the car’s exteriors that need to be modified to face taxing off-road trails, and they couldn’t be more wrong.

Getting your car’s interiors ready is as important as making the necessary modifications on the outside. If you aspire to go off-roading soon, here are some of the changes you must make to your jeep.

Invest in Suspension Seats

For an off-road driver, nothing can be more annoying (and risky) than having seats that get incredibly bumpy as you enter harsh roads on any off-road trail. As it is, your jeep becomes incredibly tricky to control in these environments. But if you have to deal with the constant bumps and harsh impacts on the inside, it makes the experience all the more difficult.

The best way to tackle this is by investing in quality suspension seats that absorb a lot of the impact on the jeep’s inside, and allows the driver to focus all his concentration on navigating through the difficult roads on the trail.

Keeping the Analog in-hand in case the Digital fails

Let’s face it; almost everything’s digitized these days, and the same can be said for maps. Nowadays, navigation is no problem, especially in urban areas, where every street and every alley is marked clearly on an app that you only need a basic mobile internet connection to access.

Unfortunately, many off-road trails aren’t marked out that well, and you simply cannot bank on mobile gadgets and gizmos to find the way if you get lost. So make sure that you carry a compass and a detailed map of the region. Technology is susceptible to random failure, and it would be a tricky situation if your phone switches off for some reason on the trail and you have no compass or map to figure the way out.

Installing the Right Radio

There are several types of radio you can install in your jeep if you want to maintain consistent touch with the outside world while you off-road. Radios are often installed as safety precautions by off-roaders, and they come in handy particularly in trails where there are no available mobile networks.

While maintaining radio contact is definitely not equivalent to a full-fledged call from a phone, it’s still much better than getting stuck in an emergency with no mobile networks in the vicinity.

Installing Secure Glovebox and Lockboxes

You may be carrying several important gear with you, and its necessary to keep them safe from the constant harsh impacts. A lot of people choose to ignore this, and as a result, they experience a lot of their items flying around inside their jeep as they navigate through the treacherous off-road trails.

With secure and well-built gloveboxes and lockboxes, you can store your items and expect them to stay absolutely safe from any kind of damage.

Car Detailing Tips: How to Keep Your Tyres Looking Good

Keeping your tyres looking good as new is all in the way you drive and how you clean that part of your car. People will notice dirty wheels and it can give the car a bad look. Car detailing starts with keeping your tyres clean and amazing.

Treading on the tyres can easily be worn away when you are driving. You can minimise the amount of damage you do by driving correctly. Sudden braking and spinning can wear away the tread detail very quickly. Only apply sudden braking if safety calls for it. Always start applying the brakes when you are about five to ten meters away from the car in front of you. Spinning can be prevented by releasing the clutch as you apply fuel to the engine.

Did you know that there is a practical way to get your tyres to be glossy? This is known as dressing or protectant. Many car dealers will apply this substance on the tyres to give the car a glossier and more attractive appearance. It also protects the rubber from the UV lights of the sun and the toxic air pollution that degrades the quality rubber surface. The dressing or protectant also adds a layer to prevent any oil or dirt from sticking onto your tyre. This chemical isn’t greasy so it won’t cause you to spin on the road. Rather it is more of a non-stick surface that can grip onto the gravel or tar road.

Sunlight has the harsh ability to age and damage the rubber on the tyres. Over time you will start experiencing the tyres to be brittle and it can break with the slightest hit. However, you can avoid this from happening.

When cleaning your tyres you need to use a cloth, a high pressure hose and the cleaning detergent of your choice. You always start with hosing down the tyres to remove any dirt, oil or residue. This shouldn’t take long and will make the cleaning process easier. After you have hosed the dirt away you can apply the wheel detergent. To remove oil from the wheels you will require than just water so a wheel detergent would be ideal. Next, you can use brushes that can clean the treads and crevices. The cloth will absorb any water that was on the rim and leave it looking clean and sparkly.

Status is a big part of society so doing a bit of cleaning and shining can give you that little boost. Tyres are important when you are a driver. They allow you to move forward and to climb an incline without over-using your throttle. So keep them clean and in good condition.

Minty’s is amongst the leading tyre suppliers in South Africa, and is recognized for our high standard of customer service. We have built a reputation amongst our customers and ensure that they receive tyres and alloy wheels of the highest quality, amongst the largest brands nationwide.

Vehicle Wraps – A Magical Transformation

Vehicle wraps are these magical inventions that can bring in a revolutionary change in the look of your vehicles and garner a lot of attention in public for better or worse.

These are nothing but large sheets of printed vinyl that are used to cover vehicles and give a complete different look to it.

Be it giving your vehicle a poster covering or solid color coverage or using a company logo, there are some companies which have some in house design teams that make these from scratch to your preferred specifications.

Having a complete makeover and bringing in a complete new appearance for the vehicles is exactly the goal of these vehicle wraps and they do a commendable job in that.

Here are a few enjoyable outcomes of using these vehicle wraps that might motivate you further to give it a try and see the magic unravel for yourself

1. Dibs on grabbing the attention

Colorful vehicle wraps with brightening textures – who wouldn’t turn back twice and look at these beautiful colors?

Nobody would make an effort to turn and admire a black or grey passing van, but as soon as they are a vehicle passing with colorful graphics sprawling over a sheet covering the fan – obviously the particular company will be a witness to more of the attention and admiration from every next passerby. It’s eye catching and entrancing and gets bonus points for the particular company.

2. Protection assurance

Vehicle wraps always protects the body from scratches and road debris forming holes and dents. These large sheets of vinyl can easily be removed whenever you want without fading the color of the vehicle and causing any alterations. This vehicle wraps help to keep the vehicles in appropriate conditions to get sold in the future. It does not cause any damage and thus the vehicles can be used for a long time without any replacements.

3. Cost is not an issue

When it comes to advertising, you need to continuously keep paying money for as long as you wish the advertisement to come out. Where as in case of vehicle wraps, you can change them whenever you wish to and that too at a much more cost friendly situation. You can opt for an initial payment of half of long time advertising campaigns and make use of it over a long period of time. Hence the vehicle wraps appear to be cost effective as well thus only adding to the lists of benefits it provides us with.

Therefore as you can see these vehicle wraps are useful enough to get purchased not only for a better business, but for a better appearance.

Wouldn’t you want your vehicle to get all the appreciation while on the road?

Wouldn’t all the compliments make you feel happy about the vehicle you’re in possession of?

Then go take advantage of this luxury today and give your car the ravishing look it deserves.

How the Combustion Engine Works (and Why It Matters)

How the combustion engine works: by detonating hundreds of small explosions every second.

A piston glides along a cylinder, pushing and pulling. The piston pulls down air and gas in the intake stroke and fills the cylinder with the fuel for the fire. The cylinder is primed and the air-gas mixture is ready for compression. Compression creates massive potential energy.

The piston glides back up the cylinder, pushing the air-gas mixture hard and fast into a tiny space—compressing it down to 1/10 (or greater) of its original size (a compression ratio of 10:1). The gases are compressed during the compression stroke, smashing the molecules closer together and increasing the potential energy. Then comes the crescendo.

Spark. Ignite. Explosion. When the gases have been compressed and the piston is at top dead center (TDC), a spark flashes and sets the highly energized compressed gases on fire. Boom! The power stroke—the tiny explosion that propels all combustion engines.

The explosion pushes the piston back down and the crankshaft spins in unison. The energy moves the crankshaft and creates the power under the pedal. Finally, the piston glides back up the cylinder to eject the exhaust—the exhaust stroke—and clears the way for the process to start over. And over. Hundreds of times per second.

Your car’s engine sounds pretty smooth, but slow it down and it sounds like artillery fire—individual booms. An 8 cylinder car idling at 750 RPMs “fires” 50 times per second. That’s 50 power strokes each second while idling!

The basic process of the four-stroke engine is the same as it was in 1876 when Nikolaus Otto invented it. The only differences between an engine that powers the 2017 CTS-V with 640 horsepower (HP) and the 3 HP engine created in 1876: efficiency and capacity. It boils down to compressing air and gas into a tiny space, lighting it on fire and transferring that energy into mechanical motion. That’s all it takes to move the family minivan or James Bond’s Aston Martin.

The Four Basic Strokes: A Closer Look

The entire process only takes four strokes of the piston.

  • Intake Stroke
  • Compression Stroke
  • Power Stroke (Combustion Stroke)
  • Exhaust Stroke

Intake StrokeAs the piston moves down on its first stroke, the intake valve opens and allows the combustion chamber to fill with air and fuel. This creates a space ready to explode even without compression. But add compression and you create a lot of potential energy. It’s possible to add more fuel and more air during the intake stroke to create a more powerful mixture to increase horsepower but be sure to check your tuning if you do add performance parts.

Compression Stroke

When the intake stroke ends at the bottom of the cylinder, the compression stroke begins. The piston moves up and forces the air and gas into a tiny space. A 10:1 compression ratio will compress the air-gas mixture down to 1/10 the size of the compression chamber. The higher the compression ratio the more potential energy which means more power for your pedal. Compress for power. Note that higher compression ratios require higher octane fuels.

Power Stroke (Combustion Stroke)

The power stroke starts when the compression stroke hits top dead center (TDC) (or before top dead center, BTDC) and a perfectly timed spark ignites the gases. This moment is what the engine is all about. Getting the right gases (air-fuel ratio) ignited at the right time with as much energy as possible. The size of the chamber, the compression ratio, the spark, the timing—everything is to maximize the energy of the explosion and then transfer it to mechanical motion. The power stroke thrusts the piston downward propelled by the explosion leading to the fourth stroke.

Exhaust Stroke

On the piston’s second upward stroke, the exhaust valve opens and the piston pushes the burnt gases up and out of the exhaust valves. When your exhaust system is maximized, the pressure the piston encounters on its way up is minimal and the valve moves with less restriction which can give you power gains. Also, with a high performing exhaust system, the exhaust stroke is more likely to push all the burnt gases out of the chamber clearing the way for a clean intake stroke and a stronger power stroke. The cycle is complete and the piston and chamber are ready to begin again.

So What?

If you know how your engine produces power, harnesses that power, works more efficiently at keeping that power, then you’ll know how to make your engine perform its best. You can make cost-effective decisions on which modifications will give you the most horsepower return. To help with engine performance, you might consider an engine tune, a cold air intake, a performance exhaust, a performance intake manifold or even a supercharger.

Now that you know more about the four-stroke process, you will be able to determine how each modification affects each stroke. One mod may affect more than one stroke and give you more bang for your buck.

How to Pick the Right Decals for Your Jeep

Your jeep has to be of significant meaning to you. Surely, like any other jeep owner, you want your Jeep to standout from the crowd. But how do you do that? Do you go for a total makeover, with the finest paint job ever? Or do you simply accessorize it to turn it into the ultimate utility vehicle?

A very simple way of adding your own unique identity to your jeep is by investing in decals. Jeep decals have garnered immense popularity over the last few years, and nowadays, you can buy a wide variety of decals to spice up your jeep and give it a fresh look, different from any other jeep on the planet.

But how does one go about picking the decals? Read on to know all about it!

Think of What You Believe

One might be forgiven for saying that belief is in short supply these days owing to things happening around the world in the name of God and religion. However, the fact of the matter is, all of us, individually, believe in certain things. The beliefs might be delusional in nature, or they might simply be the source of inner strength.

No matter what it is, you are entitled to show it to the rest of the world. And what better way to show it than having it as a decal on your jeep? People would get to know something about you simply by taking a good look at your jeep, and you would feel more at home in your jeep, as it would become a reflection of who you are.

Think of Who You Love

Love, like belief, is another great source of strength. Again, many might say that love has more potential for heartbreaks than it does for giving one strength, but the fact is, love does create a lot of hope and optimism in one’s life.

You can turn your jeep into something truly inspiring for yourself by getting customized decals that are dedicated to the special ones in your life. It would also make them happy to know that you care for them so deeply to have their names etched on your jeep.

Think of What You Like/Love

You might be a hardcore Game of Thrones fan, or you might have been inspired deeply by the Fast and the Furious series of movies, and you want to show the world how much these things mean to you every time you rev up your jeep and leave your house. But how do you do it?

Simple! Get a custom jeep decal that states a memorable quote from your favorite movie or TV series, or maybe one that displays your favorite fictional character in all his/her glory.

Here’s hoping you get the best decals for your jeep to make it even more awesome than when you first bought it!

Visit SkullKrushers.com and buy off-road parts like decals of jeep to customize your jeep in your own style.

Everything You Need to Know About a Jeep JK

If you are enthusiastic about Jeeps love reading up about them, you might have often wondered what ‘JK’ stands for. Simply put, JK is a code that internationally famous brand Jeep uses to identify some of its vehicles.

Why the Code ‘JK’?

The code ‘JK’ has not been just assigned by Jeep without any kind of thought. Jeep has been creating the best off-roading vehicles for a long time now, and their vast range of vehicles are not designed all the same. To help them, and more importantly their customer to identify their vehicles better in case they have a requirement for certain parts of the vehicle, the code ‘JK’ was assigned to all the vehicles that were manufactured between 2007-2017.

The code is also backed up by the vehicle design specifications that Jeep have followed during the manufacture of their JK Wranglers. Most JK vehicles manufactured by Jeep look quite similar to each other in their original form. Of course, there might be differences between a regular JK Wrangler and a heavily customized one, but in essence and in shape, all JK Jeeps look alike.

Advantages of the ‘JK’ Coding System

  • Easier to Find Parts: Many other vehicle manufacturers often go with complicated coding systems that make it difficult to search for their parts in the market. It doesn’t matter if you go to an established store in your neighborhood, or search online for the parts you need; what good is any of it if you cannot identify the parts that you really need? Four-wheeler details are quite intricate, and you can’t really take a chance on parts that would not fit your Jeep, can you?
  • Time Saver at Stores: When you go to a store that sells vehicle parts, you might often have to provide the storekeepers a ton of details before they exactly understand what you precisely need. However, with the JK coding system used by Jeep, it isn’t any problem if you happen to own a Jeep JK model. Simply say ‘JK’, and the storekeeper can start helping you without wasting any more time.
  • Helps to Distinguish from Other Product Ranges: The ‘JK’ coding system extends only, and only to the vehicles manufactured by Jeep between 2007 and 2017. The newest Wrangler models, slated to be released sometime in 2018, would be assigned the code ‘JL’. So, this kind of coding system makes it easy to distinguish between the JK product range and previous and later ranges of vehicles.

No Space for ConfusionOn first glance, you might not find the code ‘JK’ on the surface of the jeep. In fact, there is no mention of the code on the surface. All you probably might see is ‘Polar Edition’, ‘Rubicon’, and ‘Wrangler’. While this might lead to some confusion, it really is quite simple. No matter what edition of a jeep you own, Rubicon or Wrangler, if it was made in the 2007-2017 period, it is a JK!

Shop jeep accessory like inner fenders, decals, Custom Grill Logos, Led Light Bars & Headlights, Jeep Grab Handles, Custom Paint, Custom Grills and Apparel. Visit SkullKrushers.com and buy off-road parts of jeep to customize your jeep in your own style.